NEET Physics · Class 11 · 34 questions · 2014 to 2026

NEET Units and Measurements previous year questions

34 questions on Units and Measurements from 18 NEET and AIPMT papers, 2014 to 2026, newest first; on average 1.9 a paper. Open a question for NTA's official answer.

Answers are NTA's official final key, shown for NEET 2021, NEET 2022, NEET 2023, NEET 2023 (Manipur), NEET 2025 and NEET 2026 Re-Examination (21 June). The other papers are given without answers until NTA's key for them is in hand; we do not put an answer of our own in its place. The questions are from published copies of each paper, not from NTA's own booklets, so a word here and there may differ from the printed paper. Chapter-wise weightage

NEET 2026 Re-Examination (21 June) (2)NEET 2026 (3 May) (3)NEET 2025 (3)NEET 2024 (3)NEET 2023 (Manipur) (2)NEET 2023 (2)NEET 2022 (4)NEET 2021 (3)NEET 2020 (4)NEET 2019 (Odisha) (1)NEET 2019 (1)NEET 2018 (1)NEET 2017 (1)NEET 2016 Phase II (1)AIPMT 2015 Re-Test (1)AIPMT 2015 (1)AIPMT 2014 (1)

NEET 2026 Re-Examination (21 June)

NEET 2026 Re-Examination (21 June) · Q38 · Dimensions of a combination of radiation constants
Consider that σs, kB, b represent Stefan-Boltzmann constant, Boltzmann constant and Wien's displacement law constant, respectively. The dimension of σskB-1b is:
NTA's answer

Answer: (2) [L-1T-1K-2]

From NTA's final answer key for NEET 2026 Re-Examination (21 June).

NEET 2026 Re-Examination (21 June) · Q40 · Vernier callipers reading with a negative zero error
One main scale division of a Vernier calliper is equal to 1mm and the number of divisions on the Vernier scale is 10. When both the jaws touch each other, the Vernier scale shifts to the left of zero of the main scale in such a way that 4th Vernier division coincides with a division of the main scale. If this Vernier calliper measures the length of a wire to be 1cm, the actual length of the wire is:
NTA's answer

Dropped by NTA. NTA's final answer key for NEET 2026 Re-Examination (21 June) drops this question.

NEET 2026 (3 May)

NEET 2026 (3 May) · Q4 · Sun-earth distance in a unit system where light speed is one
The speed of light in vacuum is taken as unity. If light takes 6 min 40 s to reach the Earth from the Sun, the distance between the Sun and the Earth in new unit is:
Answer

NTA's official answer key for NEET 2026 (3 May) is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2026 (3 May) · Q6 · Least count of a vernier callipers
In a vernier callipers, 20 VSD coincide with 16 MSD (each division of length 1 mm). The least count of the vernier callipers is:
Answer

NTA's official answer key for NEET 2026 (3 May) is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2026 (3 May) · Q21 · Density of a cube to correct significant figures
Each side of a metallic cube of mass 5.580 kg is measured to be 9.0 cm. Keeping the significant figures in view, the density of the material of the cube can be best expressed as X × 103 kg m-3, where the value of X is:
Answer

NTA's official answer key for NEET 2026 (3 May) is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2025

NEET 2025 · Q29 · Exponents for a balloon's deflation time by dimensional analysis
A balloon is made of a material of surface tension S and its inflation outlet (from where gas is filled in it) has small area A. It is filled with a gas of density ρ and takes a spherical shape of radius R. When the gas is allowed to flow freely out of it, its radius r changes from R to 0 (zero) in time T. If the speed v(r) of gas coming out of the balloon depends on r as ra and T ∝ SαAβργRδ then
NTA's answer

Answer: (1) a = -12, α = -12, β = -1, γ = 12, δ = 72

From NTA's final answer key for NEET 2025.

NEET 2025 · Q31 · Percentage error in a quantity formed from four measurements
A physical quantity P is related to four observations a, b, c and d as follows:
P = a3b2/c√d
The percentage errors of measurement in a, b, c and d are 1%, 3%, 2% and 4% respectively. The percentage error in the quantity P is
NTA's answer

Answer: (1) 13%

From NTA's final answer key for NEET 2025.

NEET 2025 · Q43 · Diameter reading of a vernier callipers with zero error
Consider the diameter of a spherical object being measured with the help of a Vernier callipers. Suppose its 10 Vernier Scale Divisions (V.S.D.) are equal to its 9 Main Scale Divisions (M.S.D.). The least division in the M.S. is 0.1 cm and the zero of V.S. is at x = 0.1 cm when the jaws of Vernier callipers are closed.
If the main scale reading for the diameter is M = 5 cm and the number of coinciding vernier division is 8, the measured diameter after zero error correction, is
NTA's answer

Answer: (1) 4.98 cm

From NTA's final answer key for NEET 2025.

NEET 2024

NEET 2024 · Q20 · Quantities with the same dimensions as solid angle
The quantities which have the same dimensions as those of solid angle are:
Answer

NTA's official answer key for NEET 2024 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2024 · Q31 · Vernier constant of a vernier callipers
In a vernier calipers, (N + 1) divisions of vernier scale coincide with N divisions of main scale. If 1 MSD represents 0.1 mm, the vernier constant (in cm) is:
Answer

NTA's official answer key for NEET 2024 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2024 · Q50 · Dimensionless combination of constants in a force-time relation
A force defined by F = αt2 + βt acts on a particle at a given time t. The factor which is dimensionless, if α and β are constants, is:
Answer

NTA's official answer key for NEET 2024 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2023 (Manipur)

NEET 2023 (Manipur) · Q10 · Mechanical quantity with dimensions containing reciprocal of mass
The mechanical quantity, which has dimensions of reciprocal of mass (M-1) is:
NTA's answer

Answer: (2) gravitational constant

From NTA's final answer key for NEET 2023 (Manipur).

NEET 2023 (Manipur) · Q21 · Mean diameter of a bob to appropriate significant figures
The diameter of a spherical bob, when measured with vernier callipers yielded the following values: 3.33 cm, 3.32 cm, 3.34 cm, 3.33 cm and 3.32 cm.
The mean diameter to appropriate significant figures is:
NTA's answer

Answer: (1) 3.33 cm

From NTA's final answer key for NEET 2023 (Manipur).

NEET 2023

NEET 2023 · Q10 · Type of error caused by unpredictable fluctuations
The errors in the measurement which arise due to unpredictable fluctuations in temperature and voltage supply are:
NTA's answer

Answer: (3) Random errors

From NTA's final answer key for NEET 2023.

NEET 2023 · Q17 · Maximum percentage error in density of a wire
A metal wire has mass (0.4 ± 0.002) g, radius (0.3 ± 0.001) mm and length (5 ± 0.02) cm. The maximum possible percentage error in the measurement of density will nearly be:
NTA's answer

Answer: (2) 1.6 %

From NTA's final answer key for NEET 2023.

NEET 2022

NEET 2022 · Q20 · Units and dimensions of plane angle and solid angle
Plane angle and solid angle have:
NTA's answer

Answer: (3) Units but no dimensions

From NTA's final answer key for NEET 2022.

NEET 2022 · Q24 · Quantity having the dimensions of magnetic permeability
The dimensions [MLT-2A-2] belong to the:
NTA's answer

Answer: (1) magnetic permeability

From NTA's final answer key for NEET 2022.

NEET 2022 · Q38 · Matching gravitational quantities with their dimensions
Match List – I with List – II:
List – IList – II
(a) Gravitational constant (G)(i) [L2T-2]
(b) Gravitational potential energy(ii) [M-1L3T-2]
(c) Gravitational potential(iii) [LT-2]
(d) Gravitational intensity(iv) [ML2T-2]
Choose the correct answer from the options given below:
NTA's answer

Answer: (4) (a) – (ii), (b) – (iv), (c) – (i), (d) – (iii)

From NTA's final answer key for NEET 2022.

NEET 2022 · Q40 · Area of a field rounded to correct significant figures
The area of a rectangular field (in m2) of length 55.3 m and breadth 25 m after rounding off the value for correct significant digits is:
NTA's answer

Answer: (2) 14 × 102

From NTA's final answer key for NEET 2022.

NEET 2021

NEET 2021 · Q14 · Dimensions of the ratio of energy to gravitational constant
If E and G respectively denote energy and gravitational constant, then EG has the dimensions of:
NTA's answer

Answer: (4) [M2] [L–1] [T0]

From NTA's final answer key for NEET 2021.

NEET 2021 · Q18 · Diameter of a wire from screw gauge readings
A screw gauge gives the following readings when used to measure the diameter of a wire
Main scale reading: 0 mm
Circular scale reading: 52 divisions
Given that 1 mm on main scale corresponds to 100 divisions on the circular scale. The diameter of the wire from the above data is:
NTA's answer

Answer: (3) 0.052 cm

From NTA's final answer key for NEET 2021.

NEET 2021 · Q28 · Dimensions of energy with force, acceleration and time as base quantities
If force [F], acceleration [A] and time [T] are chosen as the fundamental physical quantities. Find the dimensions of energy.
NTA's answer

Answer: (1) [F][A][T2]

From NTA's final answer key for NEET 2021.

NEET 2020

NEET 2020 · Q100 · Pitch of a screw gauge from least count and divisions
A screw gauge has least count of 0.01 mm and there are 50 divisions in its circular scale. The pitch of the screw gauge is:
Answer

NTA's official answer key for NEET 2020 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2020 · Q105 · Subtraction of lengths to correct significant figures
Taking into account of the significant figures, what is the value of 9.99 m − 0.0099 m?
Answer

NTA's official answer key for NEET 2020 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2020 · Q124 · Dimensions of stress
Dimensions of stress are:
Answer

NTA's official answer key for NEET 2020 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2020 · Q131 · Conversion of a bond energy from joule to electron volt
The energy required to break one bond in DNA is 10-20 J. This value in eV is nearly:
Answer

NTA's official answer key for NEET 2020 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2019 (Odisha)

NEET 2019 (Odisha) · Q2 · Least count of vernier callipers
The main scale of a vernier callipers has n divisions/cm. n divisions of the vernier scale coincide with (n – 1) divisions of main scale. The least count of the vernier callipers is,
Answer

NTA's official answer key for NEET 2019 (Odisha) is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2019

NEET 2019 · Q29 · Maximum percentage error in a combined quantity
In an experiment, the percentage of error occurred in the measurement of physical quantities A, B, C and D are 1%, 2%, 3% and 4% respectively. Then the maximum percentage of error in the measurement X, where X = A2 B1/2C1/3 D3, will be:
Answer

NTA's official answer key for NEET 2019 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2018

NEET 2018 · Q13 · Diameter measured with a screw gauge having zero error
A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular scale division coincides with 25 divisions above the reference level. If screw gauge has a zero error of –0.004 cm, the correct diameter of the ball is
Answer

NTA's official answer key for NEET 2018 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2017

NEET 2017 · Q5 · Quantity with the dimension of length from c, G and e²/4πε₀
A physical quantity of the dimensions of length that can be formed out of c, G and e24πε0 is [c is velocity of light, G is universal constant of gravitation and e is charge]:
Answer

NTA's official answer key for NEET 2017 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

NEET 2016 Phase II

NEET 2016 Phase II · Q36 · Combination of h, c and G with the dimension of length
Planck's constant (h), speed of light in vacuum (c) and Newton's gravitational constant (G) are three fundamental constants. Which of the following combinations of these has the dimension of length?
Answer

NTA's official answer key for NEET 2016 Phase II is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

AIPMT 2015 Re-Test

AIPMT 2015 Re-Test · Q24 · Exponents in the critical velocity formula by dimensions
In dimension of critical velocity vc, of liquid flowing through a tube are expressed as (ηxρyrz), where η, ρ and r are the coefficient of viscosity of liquid, density of liquid and radius of the tube respectively, then the values of x, y and z are given by
Answer

NTA's official answer key for AIPMT 2015 Re-Test is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

AIPMT 2015

AIPMT 2015 · Q3 · Dimensions of surface tension with energy, velocity and time as base
If energy (E), velocity (V) and time (T) are chosen as the fundamental quantities, the dimensional formula of surface tension will be
Answer

NTA's official answer key for AIPMT 2015 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

AIPMT 2014

AIPMT 2014 · Q10 · Dimensions of mass with force, velocity and time as base units
If force (F), velocity (V) and time (T) are taken as fundamental units, then the dimensions of mass are
Answer

NTA's official answer key for AIPMT 2014 is not in hand yet. This page will carry the answer when it is; we do not put an answer of our own in its place.

Free NEET chapter practice and testsSee the Class 12 flashcards

Motion in a Straight Line →